Under two weeks

The current ticker shows departure at less than two weeks!

Counting down, counting down...

Latest trip projects include scrubbing the new tires and bug proofing the gear.  Let me explain.

When new tires are made during their casting, the manufacturer cakes them with a slippery substance with what is affectionately known as “mold release”.  No, this doesn’t release that harmful to the health fungus that grows underneath your leaky kitchen sink.  Instead, rubber mold release allows the tire to release itself from the casting.

Some tire designs use very little mold release…these newly installed Mitas Dakar E07 dual sport tires comes with tons of it.  Running one’s hand over their rubber, you can actually feel the chemical residue.  It makes the tire very slippery which can make it very hard to control on wet roads.  The easiest way to remove the residue is to ride one’s motorcycle on a gravel road which effectively removes any retained chemical.

The issue I had yesterday was that the county I live in has been aggressively spending taxpayer dollars to gravel every road they can find.  Of course, this makes those living on these streets very happy and makes them much easier to plow the snow in the winter months here.  I spent nearly ninety minutes searching the county for a road of rock…nearly impossible to find nowadays.  In fact, when I finally found a road, the county has signs up that the road will be paved next week.  Future gravel road scrubbing of new tires will become even harder to make happen.  I may have to just stop by a country business parking lot and use their area in the future.

Riding on gravel is a experience if you’ve never been on two wheels.  Hard packed gravel is easy to ride on…especially when the tire tracks from countless prior vehicles have made easy to navigate pathways.  When the road has been recently graveled but not compacted down, then it’s like running through a lane of marbles.  Yesterday’s journey was among white dusted marbles it would seem.  The gravel section was no more than a quarter-mile long, so at the ends I simply donuted and went back the way I just came.  Each successive pass was easier as I got used to the rock underneath the tires.  Mission accomplished.  Tires on the riding part of the tread do not feel very slick any longer.

Get a good look...gravel roads are slowly disappearing...
Today’s project was spraying permethrin on all clothing and gear that would be going north with me in a couple of weeks.  This chemical keeps the bugs away and kills the ticks and stuff within one minute of their getting onto the clothing.  A camper’s dream, this stuff is toxic when wet and sprayed on and requires safety gear such as protective glasses, gloves, and a filter mask.  Once it dries though, it’s very safe, lasts a long time, and is even good for six or more washes of the clothing in the washing machine.  And it’s odorless when dried, so the raccoon and bears should not be inclined to check out my tent any more than usual.
Works wonders to kill the bugs dead.

The tent, sleeping bag, sleeping pad, clothing, boots, riding gear and anything else made of fabric that will be worn or used in the woods or outdoors got the treatment today.  Do some research on this…you’ll never go into the woods again without it.

So, the preps of doing the “small stuff” continues.  There is plenty to do before heading to Alaska but everything is easily manageable at this time.  The days continue to fly by…


Last two new product installs before departure

Any day that you wake up and the sun is shining, the morning temperature is in the middle sixties, and you can jump on the motorcycle and ride without tons of traffic…well, that’s almost the definition of a perfect day to be alive.    Topping it off with some new tires and a helping of a new throttle lock now in place…well, it doesn’t get much better than this.

The Mitas E07 Dakar tires finally found a place out of my garage and onto the Vstrom today, compliments of the labors of Brian, another good riding friend of mine.  Some of you may remember that name…he’s the one responsible for this customized look to my bike last fall:

Remembering the days…

Fortunately, today’s work was much easier…a simple two tire swap out from the previously ridden 95% highway tires…Michelin Pilot Road 4…to the new Dakars that are designed as a 50-50 tires…50% asphalt, 50% dirt.  It’s 4,000 miles of highway before I see dirt up north though.

Anyways, here’s one picture of Faith (the name of my bike) wearing one of her new shoes:

The Dakar’s are very, very beefy tires.  Weighing around twice as much as the Michelin’s that they replaced, there’s no mistaking the motorcycle for anything but a true dual sport bike now.  Unlike some adventure riders that have bikes like this to show off to their friends, this one’s actually going to be doing one heck of a journey in just eighteen days.

My immediate feedback on the Mitas are mixed.  They don’t produce the road noise I have heard so much about previously, but they fall very quickly.  It feels like riding on a balance beam…the slightest lean of the bike and the machine wants to keep going over.  It is a weird feeling, especially doing donuts in the round dead end at Brian’s home.  It will be very, very easy to lean this bike quickly through tight curves, that’s for sure.  Looking forward to seeing how it feels in the rain though, which I expect I will have plenty of opportunity to experience soon enough.

The tires are very slick new though.  Both Brian and I commented on that as we handled the tires during their wheel installations…a process previously described when work on my ex-Ultra was detailed on this blog a couple of years ago.  Changing lanes over a solid white, the bike got a little loose.  Definitely will need to get it to a gravel road and scrub the tires in to remove the “new tire feeling”.

The last new accessory to go on the bike is an ATLAS Throttle Lock.  This is a device that holds your throttle in a temporarily locked position while you ride, which helps reduce hand fatigue on long jaunts.  There are dozens of different types of throttle locks; each has their positives and negatives.  The ATLAS replaces a N.E.P. lock that drove me nuts.  The N.E.P. was easy to engage with the right thumb while riding, but took two hands to disengage.  Causing more than one butt-puckering event, it was time to find a different solution.

The ATLAS was a Kickstarter project which after reading up on it, I quickly participated with a purchase donation of the product that was still being developed.  You can read about the Kickstarter project HERE if you wish.  Developed by a RTW (round the world) motorcyclist that envisioned a throttle lock that actually worked properly, I received one of the first production release pieces when the developer heard I was going to Alaska and wanted to ensure that I brought this along for some hard core usage in a short amount of time.

I’ve exchanged some feedback with David (owner/creator) already on this device.  Fresh out of the box, the switch is hard to use…but after sitting in the recliner and activating/deactivating it probably around 30-40 times, it is much easier to engage and disengage now.  It’s a quality piece of hardware.  And I mean HIGH quality.  It exudes American made quality; not that import junk you find at the dollar store or even at most motorcycle gear shops.  The knurled button simply pushes in to catch the throttle and lock it…and you push down on the button from the top to release it.  If I could make one change to the product, I’d create a little lip with knurling on it to catch it just a shade easier with the thumb during the disengaging sequence.  It’s not required…but it would definitely add just a touch more to it.

This comes with pages of instructions and drawings, making it easy to install.  Also comes with the needed allen wrench too!  And a few other pieces.  And you know it’s good kit when the package comes with a sticker  as well for your toolbox collection!

Installation on the Vstrom was not hard, but it was not a simple “plug and play” type of install either.  As David previously warned, some bikes would require some very quick and easy modifications to get this to seat properly.  My bike was one of these bikes.  A small hacksaw blade allowed us to cut out some throttle grip material to get this to seat perfectly; a small slice with a razor knife allowed the fitment not to have any impedance.  I can see that most motorcycles would not have the problems that the Vstrom did.  After all, the Vstrom is a wonderous piece of machinery.  Not wonderful…wonderous.  Many of us owners wonder what was going through the minds of the designers when they created this motorcycle.  But with a little patience and test fitting the ATLAS installed in about fifteen minutes.  I didn’t see any way that the device could install easier.  Just take the needed time to install it correctly and it will work produce worthwhile results.

ATLAS installed on a ’07 DL650A

I rode forty-some miles with it today, engaging and disengaging it many times.  It holds well, is intuitive on the placement of the switch, and most importantly, it release the lock on the throttle very easily.  No more needing two hands on the right side of the bike; this releases the hold very quickly and without hardly any effort.  A nice refreshing change over the N.E.P. and many other devices.   Only time will tell how good this is…and I plan to put it through the ringer really soon.  If this device doesn’t still work as it should by the time I get back from Alaska, I’ll create an update post about it.  Right now, I don’t see anything that would create any issues for the long haul.

So far, on a scale of five, I’d give it a 4.5.  I’m dinging a shade for missing the lip to release the lock a shade easier but that is my own preference and I can see where somebody else could care less about it.  I rarely give more than a 4 in rating for any product; this is quality kit and I’m going to recommend this every time somebody asks about a throttle lock solution going forward.

You can learn more about the ATLAS by clicking HERE.

18 days…13 hours.  The anticipation is starting to ratchet up here.


Shakedown Ride & 21 Days

Yesterday mid-morning I returned home from a leisure overnight adventure in which some curvy roads around the southern part of the state near the old Jefferson Proving Grounds were explored.  The Vstrom found no unexploded ordinance but a couple tanks of gas were easily expended throughout the journey.  The purpose of the ride was known in the touring world as a “shakedown ride”, in which a bike is loaded up exactly the same as it will be done for a long journey and all of the gear is utilized in a real life scenario closer to home in case of problems.

It is unbelievable how much gear this bike will carry.  Of course, with a top case, two side panniers, two crash bar bags, and a tank bag, lot of things find hiding place easy enough.  Anything that didn’t fit in any of these listed areas went into the 70 liter dry bag that strapped to the rear seat.  Everything in this bag were the contents that needed to find their way into a tent in a dry condition…clothing, sleeping bag, sleeping pad, pillow, and some electronics.  Backing the bike out onto the sidewalk in preparation to leave, it looked almost impossible that everything I would need for an extended journey to Alaska was on the bike ready to go.

Looks like just taking the 70 liter bag for a ride!

The bike has a ton of stuff packed away.  I’ll throw everything onto the floor in the next week or so and get a picture; it is just amazing how much stuff is actually going with me.

In addition to the gear I wanted to check out, I have been experimenting with proper video camera placement on the Vstrom.  This bike vibrates like my old Harley in certain places; those places seem to be in the best places to actually mount a camera.  Some of the past test video has come across pretty shaky.  The rear side panniers are actually a very stable location to mount a camera with a suction cup mount.  These types of mounts make me very nervous; trusting $400 in equipment to the holding power of a curved piece of rubber that is forced down into a flattened shape.  Besides running a custom electrical solution (it actually ties into my battery tender cabling), a removable lanyard consisting of a double ended hangman’s noose provides the security that if the mount gives away, the camera will dangle down versus being shattered on the ground.  Tested at 70 miles per hour, the camera held out for the two days of riding just fine without a single problem.

Video camera hard to see from this angle...easily noticeable from the rear.

One of the test videos can be seen HERE on VIMEO.  The perspective isn’t too bad and the vibrations are greatly reduced allowing for clearer imagery.  Many of the file sharing sites like Vimeo lowers the quality of the videos quite a bit; on the big screen TV at home, the video plays very smooth and is crystal clear.  The plan is to record many of the interesting places on the Alaska journey and to make a reminiscence video when I return.  That may take months to put together; a great project for a few months when I return home.

Anyways, I extended an offer to a friend named Allan to tag along with me, which he immediately accepted and made his necessary arrangements to take time off of work with almost no notice. As I’m now unemployed, the decision was pretty easy to get approved.  Allan also rides a Vstrom, same year and engine size as mine.  That’s great in case I have a breakdown; I can just steal parts of the parts bike that ended up following me around for a day and a half.

The meetup on Wednesday morning was done just west of Morristown in about 45 degree weather.  A quick stop into the Bluebird Diner for many cups of coffee and some biscuits and gravy with a solid fried egg on the top provided plenty of nourishment for this wanderer for the day.

Again, the ride meandered around east then south, then west then back to the east before proceeding to the night’s campsite at one of Indiana’s best kept secrets.  Quakertown State Recreation Area.  Connected to Brookville Reservoir, it hosts a very large campground that seems to be always be completely or nearly deserted every time I have visited it.  Wednesday evening was no exception.  Of the 50 or so campsites, only two others were occupied…by people on RVs.  Allan and my tents were the only fabric put up for the night in the entire campground.

We had 98% of the campground to ourselves but we ended up putting our tents less than five feet from each other.  The issue was that our phone weather radar apps showed rain for the night and we both jostled to get on the highest slope we could find in the park…just in case.  Nothing is worse than waking up and trying to clear camp in puddles or lots of mud.  So our desire to not be in any flooded area made us both immediate neighbors for the night.

 

After cooking up some dinner, a couple of hours were spent at a campfire and BS’ing into the hours of night.  Nothing beats sitting by a roaring campfire talking with a good friend.  We stayed sheltered under a large maple tree protecting us from the rain, which came down a lot stronger after we had found our way into our tents.

Thursday morning found temperatures again in the mid forties.  The night was actually pleasant…having good camping gear helps keep you comfortable and the lower temperatures did not affect either of us.  The camping trip did allow me to identify some things I need to make changes to when I had to the Last Frontier in three weeks though.

The shakedown ride was a success as I will make some modifications to the planned gear over the next week.  Looks like I’ll put my Mitas Dakar tires on this weekend; install a new throttle lock; manage another oil change; and do a tightened bolt check.  It is just days away.  The time has flown by very, very quickly over the past year.  I still feel like departure day will be here in what feels like just a couple of days.

I plan to put some entries onto this blog during the trip north but I realized that I desire to concentrate more on enjoying the trip for myself then trying to keep a running online journal going.  So I’ll update on the blog from time to time, but not to the extent I originally planned on doing.  In the evenings, when having a chance to stare into a blazing fire or to sit in the tent trying to blog without any type of Internet service, I think I’ll spend the time by the warmth of the flames.  I do plan to take scrupulous notes of things, takes lots of video and still photography as I go, and write volumes when I get back home.  It’s just for the main content, everybody will have to wait for me to write it up while sitting in my recliner in front of the television.  The trip tracker will be live though and there will be random pictures and words posted to the blog during the trip though.  We’ll just consider them teasers for what is to come a little later.

Oh, a congratulations goes out to my brother Scott and his girlfriend of quite some time April who made the surprise announcement that they have decided to marry.  Their engagement period will actually be very short as their wedding is slated for the end of the month.  This couple is perfect for each other; they work very well as a Yin-Yang and meld perfectly.  I look forward to seeing you both really soon at the wedding.

Enjoy your day.


Less than a month to go

Less than a month to go before departing on two wheels for the last frontier.  Time is still quickly passing by and I envision backing the Vstrom out of the driveway in what will feel like just days from now.

Nothing left to purchase.  Figured out what goes where on the bike.  Made some needed reservations for things that just have to be done for certain dates before leaving.  Ready to go.

Greased Cotton Balls and 2 Pounds of Fresh Air

This morning brings about sunshine and quickly warming temperatures; a vast difference from last night’s hail storms that came through the area. Inspection of the car in the driveway shows no damages. May have to get on the roof of the house to look for hail evidence as it sounded like we were in a metal roofed home when the storms came through. The dogs were scared to death from all the ice hitting the windows and the sound of bowling balls from the heavens hitting overhead.

Countdown to Alaska now shows a shade over 38 days remaining.

There’s nothing left to purchase for the trip but the list of things to do still remains. Technically I could jump on the bike and head north today if things worked out to do such but the list of prep needs will make things easier on the trip.

This morning the project was to make more easy firestarters. A quick trip to the dollar store a few days ago netted a large bag of cotton balls as well as a jar of Vaseline. Simply coat the cotton with the petroleum jelly and squeeze as many of the soaked balls into a hard container. I use a 35mm film canister as it can hold a couple dozen ready to go firestarters in a small space. The entire set up cost less than $3. The benefit is once a spark hits the soaked balls, a fire stays lit for around three minutes….even in the rain. Gives plenty of time to get a fire going.

When I go camping, I carry a small fire kit. Held within a Maxpedition Mini Pocket Organizer are the above mentioned fireballs, a BlastMaster camping frustrater, a Leatherman Micra, and a mini Bic lighter. Behind all of this are hidden pockets that hold emergency money funds, one of my business cards should the organzier be found when someday I leave it somewhere, and a few other out in the wilderness necessities.

I learned a long time ago to make sure to have redundant ways to start a fire when away from civilization. Even in the summer months, a person can get hypothermia if a cold front comes through in the evening hours.

Another purchase made last week is a new Apple Macbook Air. I am very familiar with computers, networks, Apple, PC, routers, etc. My other two laptops are a older Macbook Pro from 2009 and a Dell Latitude from 2012. I alternate back and forth between these two and one of them was slated to become my blogging tool for the Alaska trip. However, the Dell weighs nearly six pounds and the Macbook is nearly four pounds and getting slower with age.

One evening, I found myself surfing the Internet looking for new laptop options. Coming across Apple’s website, I started looking at the Macbook Air models due to their light weight and portability options. At under 3 pounds and less than 0.11 inches thin at its smallest to a maximum of 0.68 inches thick at its peak, this 13.3” computer was something that would fit my needs perfectly.

Two days after ordering, the Air arrived on my doorstep. It boasts a battery life of 12 hours…and it doesn’t disappoint. I have not tested out the maximum mobile battery life yet but have gone ten hours and still showing a 14% remaining amount of time. Yep, I’m hooked. Love this thing.

I have not found any negatives with the Air yet. it is typical Apple quality; the fitment between components is amazing and like most of their products, this is enjoyable to use. Definitely recommended.

A lunch meeting is approaching, time to run. Enjoy your day.